Autodesk 24000-000000-9860 - Revit Architecture - PC User Manual page 1418

After joining the roof and the soffit
clip plane A vertical or horizontal plane that defines a boundary for a view. You can use top, bottom, left,
and right clip planes to define a view. In elevation and section views, you can also use a far clip plane to
define the depth of the view.
See View Range on page 198.
Green dotted lines define the clip
planes for an elevation view
closed loop A sketched line that connects to itself, creating a 2-dimensional shape. A closed loop cannot
contain coincident or intersecting segments.
In Revit Architecture, you sketch closed loops to create floors, ceilings, plan regions, openings in walls and
roofs, solid extrusions, and other parts of a building design. In the following sketch, a closed loop defines
the walls, ceiling, and floor. An open loop defines the roof. See Sketching on page 251.
1380 | Glossary