Show Power - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Chassis Management and Monitoring Commands

show power

Displays the hardware information and current status for chassis power supplies.
show power [supply] [number]
Syntax Definitions
supply
number
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
When the show power command is entered on stackable switches, information is displayed only for
power supplies that are installed in the chassis and powered on. If a power supply is present in a power
supply bay, but the power supply is unplugged or its on/off switch is in the off position, the power supply
is not listed in the command output.
Examples
-> show power
Slot PS Wattage
----+----+---------+------+-----------+----------
1 600
2 600
3 --
4 600
5 600
6 600
7 600
-> show power 5
Module in slot PS-5
(Power Shelf slot 5)
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Operational Status:
Power Provision:
OmniSwitch 6250 CLI Reference Guide
Optional command syntax.
The single-digit number for a specific power supply installed in the
chassis. If no power supply number is specified, information for all
power supplies is displayed.
Type Status Location
AC UP Internal
AC UP Internal
-- -- --
IP UP External
IP UP External
IP UP External
IP UP External
OS-IPS-600A,
ILPS AC,
902252-10,
A01,
E51P4078,
JAN 07 2005,
UP,
600
November 2009 page 2-47