Show Ni - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ni

Displays the basic hardware and status information for Network Interface (NI) modules currently installed
in a standalone switch or in a stack.
show ni [number]
Syntax Definitions
number
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command may be used when logged into the switch that performs either the primary or secondary
CMM role in a stack.
Examples
-> show ni 1
Module in slot 1
Model Name:
Description:
Part Number:
Hardware Revision:
Serial Number:
Manufacture Date:
Firmware Version:
Admin Status:
Operational Status:
Power Consumption:
Power Control Checksum:
CPU Model Type
MAC Address:
ASIC - Physical 1:
FPGA - Physical 1:
UBOOT Version :
UBOOT-miniboot Version :
POE SW Version :
page 2-38
The slot number for a specific NI module installed in a standalone chas-
sis or the switch number within a stack. If no slot number is specified,
information for all the NI modules is displayed.
6250 24 PORT COPPER FE,
6250 24 PORT COPPER FE,
902734-90,
03,
K2182393,
JUN 27 2009,
,
POWER ON,
UP,
43,
0x6b36,
: ARM926 (Rev 1),
00:e0:b1:c2:ee:89,
MV88F6281 Rev 2,
0010/00,
n/a,
6.6.1.602.R01,
n/a
Chassis Management and Monitoring Commands
OmniSwitch 6250 CLI Reference Guide November 2009