Banner [Exec | Login | Motd] <Character> <Message> <Character - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
banner [exec | login | motd] <character> <message> <character>
Use the banner command to specify messages to be displayed in certain situations. Use the no form of this
command to delete a previously configured banner.
Syntax Description
exec
login
motd
<character>
<message>
Default Values
By default, no banners are configured.
Functional Notes
Banners appear in the following order (if configured):
• MOTD banner appears at initial connection.
• Login banner follows the MOTD banner.
• Exec banner appears after successful log in.
Usage Examples
The following example configures the system to display a message of the day:
ProCurve(config)#banner motd *The system will be shut down today from 7PM to 11PM*
5991-2114
Creates a message to be displayed when any exec-level process takes place.
Creates a message to be displayed before the username and password login
prompts.
Creates a message-of-the-day (MOTD) banner.
Banner text delimiter character. Press Enter after the delimiter to begin input of
banner text.
Specifies the text message you wish to display. End with the character that you
chose as your delimiter.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
327