SROS Command Line Interface Reference Guide
debug interface adsl events
Use the debug interface adsl events command to activate debug messages associated with ADSL events.
Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this
command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages for ADSL events:
ProCurve>enable
ProCurve#debug interface adsl events
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
99