SROS Command Line Interface Reference Guide
debug ip pim-sparse joinprune [event | state] <address>
Use the debug ip pim-sparse joinprune command to display protocol-independent multicast (PIM)
sparse mode join and prune transactions. Debug messages are displayed (real-time) to the terminal (or
Telnet) screen. Use the no form of this command to disable debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
event
state
<address>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates PIM sparse mode messages for all join and prune events and state
changes:
ProCurve>enable
ProCurve#debug ip pim-sparse joinprune
5991-2114
Displays PIM sparse join and prune events.
Displays PIM sparse join and prune state changes.
Specifies group address to filter.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
118