SROS Command Line Interface Reference Guide
called-number <DNIS number>
Use the called-number command to link calls to specific interfaces based on their dialed number
identification service (DNIS) numbers. Multiple called numbers may be specified for an interface. Use the
no form of this command to remove a configured called number.
Syntax Description
<DNIS number>
Default Values
By default no called numbers are defined.
Usage Examples
The following example links calls with a DNIS number of 9165551212 to the demand interface 1:
ProCurve(config)#interface demand 1
ProCurve(config-demand 1)#called-number 9165551212
5991-2114
Identifies the called number to be linked to an interface. The DNIS number is
limited to 20 digits.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Demand Interface Configuration Command Set
821