HP ProCurve 7102dl Reference Manual page 427

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Global Configuration Mode Command Set

ip name-server <server-address1-6>

Use the ip name-server command to designate one or more name servers to use for name-to-address

resolution. Use the no form of this command to remove any addresses previously specified.

Syntax Description

<server-address1-6>

Specifies up to six name-server addresses.

Default Values

By default, no name servers are specified.

Usage Examples

The following example specifies host 172.21.111 as the primary name server and host 172.21.1.2 as the

secondary server:

ProCurve(config)#ip name-server 172.21.1.111 172.21.1.2

This command will be reflected in the configuration file as follows:

ip name-server 172.21.1.111 172.21.1.2

Chapters

Table of Contents