HP ProCurve 7102dl Reference Manual page 107

SROS Command Line Interface Reference Guide
debug ip dns-table
Use the debug ip dns-table command to activate debug messages associated with domain naming system
(DNS) table operation in SROS. Debug messages are displayed (real time) to the terminal (or Telnet)
screen. Use the no form of this command to disable the debug messages.
Turning on a large amount of debug information can adversely affect the performance of
Note
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in SROS are disabled.
Functional Notes
The debug ip dns-table command activates debug messages to provide information on DNS table activity
in SROS. The IP DNS capability allows for DNS-based host translation (name-to-address).
Usage Examples
The following example activates debug messages associated with DNS table activity:
ProCurve>enable
ProCurve#debug ip dns-table
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
105