HP ProCurve 7102dl Reference Manual page 594

SROS Command Line Interface Reference Guide
coding [ami | b8zs]
Use the coding command to configure the line coding for a DSX-1 physical interface. This setting must
match the line coding supplied on the circuit by the external device.
Syntax Description
ami
b8zs
Default Values
By default, all DSX-1 interfaces are configured with B8ZS line coding.
Functional Notes
The line coding configured in the unit must match the line coding of the DSX-1 circuit. A mismatch will
result in line errors (e.g., BPVs).
Usage Examples
The following example configures the DSX-1 interface for AMI line coding:
ProCurve(config)#interface t1 1/2
ProCurve(config-t1 1/2)#coding ami
5991-2114
Configures the line coding for alternate mark inversion (AMI).
Configures the line coding for bipolar eight zero substitution (B8ZS).
© Copyright 2007 Hewlett-Packard Development Company, L.P.
DSX-1 Interface Configuration Command Set
592