HP ProCurve 7102dl Reference Manual page 371

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Global Configuration Mode Command Set

Make the association between the layer 2 endpoint and the physical interface using the bind command.

For example, the following creates a bind (labeled 5) to make an association between the HDLC virtual

interface (hdlc 7) and the tdm-group configured on interface t1 1/1 (tdm-group 9).

ProCurve(config)#bind 5 t1 1/1 9 hdlc 7

Usage Examples

The following example creates a HDLC virtual interface (labeled 1) and enters the HDLC Interface

Configuration mode:

ProCurve(config)#interface hdlc 1

ProCurve(config-hdlc 1)#

Chapters

Table of Contents