SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
crypto ca certificate chain <name>
Use the crypto ca certificate chain command to enter the Certificate Configuration for the specified CA.
See Certificate Configuration Command Set on page 1223 for more information.
Syntax Description
<name>
Specifies CA profile by alphanumeric string of up to 32 characters.
Default Values
No defaults necessary for this command.
Functional Notes
Typically used only in the running-config and startup-config to restore certificates.
Usage Examples
The following example enters the Certificate Configuration for the CA profile MyProfile:
ProCurve(config)#crypto ca certificate chain MyProfile
ProCurve(config-cert-chain)#
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
339