SROS Command Line Interface Reference Guide
Ethernet Interface Configuration Command Set
encapsulation 802.1q
Use the encapsulation 802.1q command to put the interface into 802.1q (VLAN) mode.
Syntax Description
No subcommands.
Default Values
No default value is necessary for this command.
Usage Examples
The following example puts interface eth 0/1 in 802.1q mode and configures a sub-interface for vlan
usage:
ProCurve(config)#interface ethernet 0/1
ProCurve(config-eth 0/1)#encapsulation 802.1q
ProCurve(config-eth 0/1)#interface ethernet 0/1.1
ProCurve(config-eth 0/1.1)vlan-id 3
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
628