SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
logging email on
Use the logging email on command to enable the SROS email event notification feature. Use the logging
email address-list command to specify email address(es) that will receive notification when an event
matching the criteria configured using the logging email priority-level command is logged by the SROS.
See logging email priority-level [error | fatal | info | notice | warning] on page 471 and logging email
priority-level [error | fatal | info | notice | warning] on page 471 for more information. Use the no form of
this command to disable the email notification feature.
Syntax Description
No subcommands.
Default Values
By default, email event notification is disabled.
Functional Notes
ip
The domain name is appended to the sender name when sending event notifications. See the command
domain-name <name>
on page 392 for related information.
Usage Examples
The following example enables the SROS email event notification feature:
ProCurve(config)#logging email on
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
470