SROS Command Line Interface Reference Guide
debug pppoe client
Use the debug pppoe client command to activate debug messages associated with point-to-point protocol
over Ethernet (PPPoE) operation in the SROS. Debug messages are displayed (real-time) to the terminal
(or Telnet) screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with PPPoE activity:
ProCurve>enable
ProCurve#debug pppoe client
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
135