HP ProCurve 7102dl Reference Manual page 535

SROS Command Line Interface Reference Guide
username <username> password <password>
Use this command to configure the username and password to use for all protocols requiring a
username-based authentication system including FTP server authentication, line (login local-user list), and
HTTP access.
Syntax Description
<username>
<password>
Default Values
By default, there is no established username and password.
Functional Notes
All users defined using the username/password command are valid for access to the unit using the login
local-userlist command.
Usage Examples
The following example creates a username of procurve with password procurve:
ProCurve(config)#username procurve password procurve
5991-2114
Alphanumerical string up to 30 characters in length (the username is
case-sensitive)
Alphanumerical string up to 30 characters in length (the username is
case-sensitive)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
533