HP ProCurve 7102dl Reference Manual page 187

SROS Command Line Interface Reference Guide
show flash <filename>
Use the show flash command to display a list of all files currently stored in flash memory or details about
a specified file.
Syntax Description
<filename>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample show flash output:
ProCurve>enable
ProCurve#show flash
Files:
245669 030100boot.biz
1141553 new.biz
821 startup-config
1638 startup-config.old
1175679 SROS.biz
821 startup-config.bak
2572304 bytes used 4129776 available 6702080 total
5991-2114
Optional. Displays details for a specified file located in flash memory. Enter a
wildcard (such as *.biz) to display the details for all files matching the entered
pattern.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
185