SROS Command Line Interface Reference Guide
show file
Use the show file command to display a specified file (located in either compact flash or flash memory) to
the terminal screen. Variations of this command include:
show file cflash <filename>
show file cflash <filename> checksum
show file flash <filename>
show file flash <filename> checksum
Syntax Description
cflash
flash
<filename>
checksum
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample show file cflash output:
ProCurve>enable
ProCurve#show file cflash startup-config
Using 2354 bytes
!
hostname "HP_West"
enable password password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
no logging email
logging email priority-level info
!
username "admin" password "password"
!
no ip firewall alg h323
--MORE-
5991-2114
Specifies a file located in compact flash memory.
Specifies a file located in flash memory.
Specify the filename of the file located in the specified memory location. Wildcard
entries (such as *.biz) are not valid for the show file command.
Optional. Displays the Message Digest 5 (MD5) checksum of the specified file.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
184