SROS Command Line Interface Reference Guide
backup maximum-retry <attempts>
Use the backup maximum-retry command to select the number of calls the router will make when
attempting to backup a link. Use the no form of this command to return to the default state. For more
detailed information on Frame Relay backup functionality, refer to the Functional Notes section of the
command backup call-mode <role> on page 904.
Syntax Description
<attempts>
Default Values
By default, backup maximum-retry is set to 0 attempts.
Usage Examples
The following example configures the SROS to retry a backup call four times before considering backup
operation not available:
ProCurve(config)#interface frame-relay 1.1
ProCurve(config-fr 1.1)#backup maximum-retry 4
5991-2114
Selects the number of call retries that will be made after a link failure (valid range:
0 to 15). Setting this value to 0 will allow unlimited retries during the time the
network is failed.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Frame Relay Sub-Interface Config Command Set
910