HP ProCurve 7102dl Reference Manual page 271

SROS Command Line Interface Reference Guide Enable Mode Command Set
show schedule
Use the show schedule command to display information regarding the schedule configuration.
Syntax Descriptions
There are no subcommands for this command.
Default Values
No default value is necessary for this command.
Usage Examples
The following is a sample from the show schedule command:
ProCurve>enable
ProCurve#show schedule
Schedule entry: DELAY-AFTER-BOOT (active)
Schedule entry: DELAY (inactive)
Technology Review
The scheduler provides a method for configuring a feature to operate during a specific time schedule and
to receive feedback when the feature should disable or enable. The goal of the scheduler is to eliminate
redundant code while providing an understandable, streamlined Application Program Interface (API) for
rapid feature development with schedules. The show schedule command displays how many features are
scheduled and whether they are active or inactive.
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 269