HP ProCurve 7102dl Reference Manual page 184

SROS Command Line Interface Reference Guide
show dynamic-dns
Use the show dynamic-dns command to show information related to the dynamic DNS configuration.
Syntax Description
No subcommands.
Default Values
No default is necessary for this command.
Usage Examples
The following is sample output from this command:
ProCurve#show dynamic-dns
eth 0/1:
Hostname: host
Is Updated: no
Last Registered IP: 10.15.221.33
Last Update Time: 00:00:00 Thu Jan 01 1970
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
182