HP ProCurve 7102dl Reference Manual page 165

SROS Command Line Interface Reference Guide
show bridge <interface> <slot/port> <bridge group #>
Use the show bridge command to display a list of all configured bridge groups (including individual
members of each group). Enter an interface or a bridge number to display the corresponding list.
Syntax Description
<interface> <slot/port> Optional. Displays all bridge groups associated with the specific interface. Type the
<bridgegroup#>
Default Values
No default value necessary for this command.
Usage Examples
The following is a sample output from the show bridge command:
ProCurve>enable
ProCurve#show bridge
Total of 300 station blocks 295 free
Address
00:04:51:57:4D:5A
00:04:5A:57:4F:2A
00:10:A4:B3:A2:72
00:12:79:00:8F:98
00:E0:81:10:FF:CE
5991-2114
show bridge ? command to display a list of applicable interfaces.
Optional. Displays information for a specific bridge group.
Action Interface
forward eth 0/1
forward eth 0/1
forward eth 0/1
forward eth 0/1
forward fr 1.17
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Age Rx Count
0 7133392
0 402365
4 2
0 412367
0 1502106
Tx Count
7042770
311642
0
231
1486963
163