HP ProCurve 7102dl Reference Manual page 148

SROS Command Line Interface Reference Guide Enable Mode Command Set
debug track <name>
Use the debug track command to activate debug messages associated with activities performed by the
named track object. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages. Variations of this command include:
debug track
debug track <name>
Syntax Description
<name> Specifies the track object.
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with all track objects:
ProCurve>enable
ProCurve#debug track
The following example activates debug messages associated with the track object named track_1:
ProCurve>enable
ProCurve#debug track track_1
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 146