HP ProCurve 7102dl Reference Manual page 166

SROS Command Line Interface Reference Guide
show buffers [realtime]
Use the show buffers command to display the statistics for the buffer pools on the network server.
Syntax Description
realtime
Default Values
No default value necessary for this command.
Functional Notes
Use the realtime argument for this command to display full-screen output in real-time. Information is
continuously updated on the console until you either freeze the data (by pressing the F key) or exit reatime
mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the information
will truncate at the bottom of the screen. In order to maximize the amount of data displayed, increase the
terminal length (using the #terminal length command).
Usage Examples
The following is a sample output from the show buffers command:
ProCurve>enable
ProCurve#show buffers
Buffer handles: 119 of 2000 used.
Pool Size Total
0 1800 1894
1 2048 64
2 4096 32
3 8192 4
4 16384 2
5 32768 2
6 65536 2
5991-2114
Displays full-screen output in real-time. See the Functional Notes below for more
information.
Used Available
119 1775
0 64
0 32
0 4
0 2
0 2
0 2
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
Max. Used
122
0
0
0
0
0
0
164