HP ProCurve 7102dl Reference Manual page 53

SROS Command Line Interface Reference Guide Enable Mode Command Set
clear pppoe <ppp interface #>
Use the clear pppoe command to terminate the current PPPoE client session and cause the SROS to
attempt to re-establish the session.
Syntax Description
<ppp interface #> PPP interface number.
Default Values
No default value necessary for this command.
Usage Examples
The following example ends the current PPPoE client session for ppp 1:
ProCurve>enable
ProCurve#clear pppoe 1
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 51