HP ProCurve 7102dl Reference Manual page 574

SROS Command Line Interface Reference Guide ADSL Interface Config Command Set
snr-margin <margin>
Use the snr-margin command to set the minimum Signal to Noise Ratio margin (in dB).
Syntax Description
<margin> Sets the minimum SNR margin in dB. The range is from 1 to 15.
Default Values
By default, SNR margin is 0 dB.
Usage Examples
The following example sets the SNR margin to a minimum level of 3 dB:
ProCurve(config)#interface adsl 1/1
ProCurve(config-adsl 1/1)#snr-margin 3
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 572