HP ProCurve 7102dl Reference Manual page 174

SROS Command Line Interface Reference Guide
show crypto ike
Use the show crypto ike command to display information regarding the IKE configuration. Variations of
this command include the following:
show crypto ike client configuration pool
show crypto ike client configuration pool <poolname>
show crypto ike policy
show crypto ike policy <policy priority>
show crypto ike remote-id <remote-id>
show crypto ike sa
show crypto ike sa brief
Syntax Description
client configuration pool
<poolname>
policy
<policy priority>
remote-id <remote-id>
sa
sa brief
Default Values
No default value necessary for this command.
5991-2114
Displays the list of all configured IKE client configuration pools.
Displays detailed information regarding the specified IKE client
configuration pool.
Displays information on all IKE policies. Indicates if client configuration is
enabled for the IKE policies and displays the pool names.
Displays detailed information on the specified IKE policy. This number is
assigned using the crypto ike policy command. Refer to
page 344 for more information.
Displays information on all IKE information regarding the remote-id. The
remote-id value is specified using the crypto ike remote-id command
(refer to crypto ike remote-id
Displays the configuration of active IKE security associations.
Displays a brief listing of IPSec security associations.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
on page 348).
crypto ike
on
172