HP ProCurve 7102dl Reference Manual page 808

SROS Command Line Interface Reference Guide
ip rip receive version [1 | 2]
Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets
received on the interface. Use the no form of this command to restore the default value.
Syntax Description
1
2
Default Values
By default, all interfaces implement RIP version 1 (the default value for the version command).
Functional Notes
Use the ip rip receive version to specify a RIP version that will override the version (in the Router RIP)
configuration.
The SROS only accepts one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures a BVI interface to accept only RIP version 2 packets:
ProCurve(config)#interface bvi 1
ProCurve(config-bvi 1)#ip rip receive version 2
5991-2114
Accepts only RIP version 1 packets received on the interface.
Accepts only RIP version 2 packets received on the interface.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BVI Interface Config Command Set
806