HP ProCurve 7102dl Reference Manual page 52

Secure router sros command line interface

Hide thumbs Also See for ProCurve 7102dl:

Table of Contents

SROS Command Line Interface Reference Guide

Enable Mode Command Set

clear lldp neighbors

Use the clear lldp neighbors command to remove all neighbors from this unit's database. As new local

loop demarcation point (LLDP) packets are received, the database will contain information about

neighbors included in those frames.

Syntax Description

No subcommands.

Default Values

There are no default settings for this command.

Functional Notes

This command generates output indicating the names of any neighbors deleted from the database and the

name of the interface on which the neighbor was learned.

Usage Examples

The following example clears LLDP neighbor Switch_1 from the Ethernet interface 0/1:

ProCurve>enable

ProCurve#clear lldp neighbors

LLDP: Deleted neighbor "Switch_1" on interface eth 0/1

Chapters

Table of Contents