Exception Memory Minimum <Memory - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide
exception memory minimum <memory>
Use the exception memory minimum command to initiate a reboot when the specified minimum amount
of memory is no longer available. This ensures that adequate memory is available to store an exception
report. Use the no form of this command to disable rebooting when the minimum memory limitation is
violated.
Caution
Executing the exception memory minimum command may cause the unit to reboot. Use
this command only if advised to by Technical Support.
Syntax Description
<memory>
Default Values
By default, exception memory minimum is disabled.
Usage Examples
The following example sets the exception memory minimum to 3 Mb:
ProCurve(config)#exception memory minimum 30000000
5991-2114
Specifies the minimum amount of memory (in bytes) that must be free
before a reboot occurs.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
359