HP ProCurve 7102dl Reference Manual page 475

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
logging email sender
Use the logging email sender command to specify the sender in an outgoing email message. This name
will appear in the From field of the receiver's inbox. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
No default value is necessary for this command.
Usage Examples
The following example sets a sender for outgoing messages:
ProCurve(config)#logging email sender myUnit@myNetwork.com
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 473