SROS Command Line Interface Reference Guide
debug ip http server
Use the debug ip http server command to activate debug messages associated with HyperText Transfer
Protocol (HTTP) server operation in SROS. Debug messages are displayed (real time) to the terminal (or
Telnet) screen. Use the no form of this command to disable the debug messages. Variations of this
command include:
debug ip http server
debug ip http server verbose
Turning on a large amount of debug information can adversely affect the performance of
Note
your unit.
Syntax Description
verbose
Default Values
By default, all debug messages in SROS are disabled.
Usage Examples
The following example activates debug messages associated with HTTP server activity:
ProCurve>enable
ProCurve#debug ip http server
5991-2114
Optional. Activates detailed debug messages for HTTP operation.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
107