HP ProCurve 7102dl Reference Manual page 416

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set
ip ftp access-class <policyname> in
Use the ip ftp access-class in command to assign an access policy to all self-bound File Transfer Protocol
(FTP) sessions.
Syntax Description
<policyname> Specifies the configured access policy (ACP) to apply to inbound FTP traffic
Default Values
By default, all ftp access is allowed.
Usage Examples
The following example applies the configured ACP (labeled Inbound_FTP) to inbound FTP traffic:
ProCurve(config)#ip ftp access-class Inbound_FTP in
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P. 414