HP ProCurve 7102dl Reference Manual page 528

SROS Command Line Interface Reference Guide
spanning-tree mode [rstp | stp]
Use the spanning-tree mode command to choose a spanning-tree mode of operation.
Syntax Description
rstp
stp
Default Values
By default, this is set to rstp.
Usage Examples
The following example sets the spanning-tree mode to rapid spanning-tree protocol:
ProCurve(config)#spanning-tree mode rstp
5991-2114
Enables rapid spanning-tree protocol.
Enables spanning-tree protocol.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
526