SROS Command Line Interface Reference Guide
debug firewall
Use the debug firewall command to activate debug messages associated with the SROS firewall
operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug firewall command activates debug messages to provide real-time information about the SROS
stateful inspection firewall operation.
Usage Examples
The following example activates the debug messages for the SROS stateful inspection firewall:
ProCurve>enable
ProCurve#debug firewall
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
94