HP ProCurve 7102dl Reference Manual page 124

SROS Command Line Interface Reference Guide
debug ip rip [events]
Use the debug ip rip command to activate debug messages associated with Routing Information Protocol
(RIP) operation in the SROS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen.
Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
events
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug ip rip command activates debug messages to provide information on RIP activity in the SROS.
RIP allows hosts and routers on a network to exchange information about routes.
Usage Examples
The following example activates debug messages associated with RIP activity:
ProCurve>enable
ProCurve#debug ip rip
5991-2114
Optional. Use this optional keyword to display only RIP protocol events.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
122