HP ProCurve 7102dl Reference Manual page 582

SROS Command Line Interface Reference Guide
bonding txinit-timer <seconds>
Use the bonding txinit-timer command to specify the value (in seconds) for the originating endpoint
negotiation timeout. Use the no form of this command to return to the default value.
Syntax Description
<seconds>
Default Values
By default, the bonding txinit-timer value is set to 10 seconds.
Functional Notes
Specifies the length of time the originating endpoint attempts to detect the bonding negotiation pattern from
the answering endpoint before deciding the bonding call has failed.
Usage Examples
The following example defines a bonding txinit-timer value of 15 seconds:
ProCurve(config)#interface bri 1/2
ProCurve(config-bri 1/2)#bonding txinit-timer 15
5991-2114
Specifies the number of seconds the endpoint waits to detect the bonding
negotiation frame pattern from the remote endpoint (when a call is connected)
before considering the bonding negotiation a failure.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BRI Interface Configuration Command set
580