SROS Command Line Interface Reference Guide
debug backup
Use the debug backup command to activate debug messages associated with backup operation. Debug
messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to
disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug backup command activates debug messages to aid in the troubleshooting of backup links.
Usage Examples
The following example activates debug messages for backup operation:
ProCurve>enable
ProCurve#debug backup
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
86