Autosynch-Mode - HP ProCurve 7102dl Reference Manual

SROS Command Line Interface Reference Guide

autosynch-mode

Use the autosynch command to configure the SROS to synchronize the startup-config and SROS.BIZ
files located in the system flash memory and the compact flash card. Use the no form of this command to
disable this feature.
Syntax Description
No subcommands.
Default Values
TM
The AutoSynch feature is disabled by default.
Functional Notes
The AutoSynch TM features configures the system to synchronize the startup-config and SROS.BIZ files
located in the system flash memory and the compact flash card. When enabled, the system compares the
two files in the two locations and replaces the files located in the system flash memory with the ones from
the compact flash card (regardless of which set of files is more current). This allows the customer to
maintain the version of the operating system, and the configuration for that operating system, at the
desired level. To accomplish this, a synchronization check is performed on the system any time there is a
change in startup-config or SROS.BIZ on the compact flash card.
The autosynch feature allows for quick installation and updates of routers by inserting a compact flash card
containing the desired software (must be renamed from the desired operating system software, such as
J03.01.biz to SROS.BIZ) and startup configuration file (must be named startup-config) into a router with
TM
AutoSynch enabled. The ProCurve Secure Routers automatically boot from the compact flash (and
secondarily from internal flash). After booting, with AutoSynch
files in system flash memory with the desired files from compact flash.
Caution
Deleting the SROS.BIZ and startup-config files from the compact flash card (using the
erase command) deletes the files from the system flash memory as well.
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
TM enabled, the router will synchronize the
325