HP ProCurve 7102dl Reference Manual page 747

SROS Command Line Interface Reference Guide
hold-queue <queue size> out
Use the hold-queue out command to change the overall size of an interface's WAN output queue. Use the
no form of this command to return to the default setting.
Syntax Description
<queue size>
Default Values
The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay
round-robin is 200.
Usage Examples
The following example sets the overall output queue size to 700:
ProCurve(config)#interface atm 1.1
ProCurve(config-atm 1.1)#hold-queue 700 out
5991-2114
Specifies the total number of packets the output queue can contain before
packets are dropped. Range: 16 to 1000.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
ATM Sub-Interface Config Command Set
745