HP ProCurve 7102dl Reference Manual page 804

SROS Command Line Interface Reference Guide
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
null
Default Values
By default, this is set to null (meaning no authentication is used).
Usage Examples
The following example specifies that no authentication will be used on BVI interface 1:
ProCurve(config)#interface bvi 1
ProCurve(config-bvi 1)#ip ospf authentication null
5991-2114
Specifies message-digest authentication type.
Specifies that no authentication be used.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
BVI Interface Config Command Set
802