HP ProCurve 7102dl Reference Manual page 99

SROS Command Line Interface Reference Guide
debug frame-relay multilink <interface>
Use the debug frame-relay multilink command to activate debug messages associated with Frame Relay
multilink operation. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the
no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<interface>
Default Values
By default, all debug messages in the SROS are disabled.
Usage Examples
The following example activates debug messages associated with multilink operation for all Frame Relay
interfaces:
ProCurve>enable
ProCurve#debug frame-relay multilnk
5991-2114
Optional. Activates debug messages for the specified interface. Type debug
frame-relay multilink ? for a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
97