SROS Command Line Interface Reference Guide
authorization commands
Use the authorization commands command to assign AAA authorization methods to lines. You must first
turn AAA on for this command to become available. Use the no form of this command to disable this
feature. Variations of this command include:
authorization commands <level> <name>
authorization commands <level> default
Syntax Description
<level>
<name>
default
Default Values
The default for this command is off.
Usage Examples
The following example applies the default authorization method to line 1:
ProCurve(config)#aaa on
ProCurve(config)#line telnet 1
ProCurve(config-telnet1)#authorization commands 1 default
5991-2114
Specifies a command level (1 or 15).
Applies a named authorization method to this line.
Applies the default authorization method to a line.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Line (Telnet) Interface Config Command Set
555