Enabling Displaying The Copyright Statement; Configuring Banners; Banner Message Input Modes - HP MSR Series Configuration Manual

Step
4. Set a daylight saving time
scheme.

Enabling displaying the copyright statement

The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a
console user quits user view. You can disable or enable the function as needed. The following is a sample
copyright statement:
**************************************************************************
* Copyright (c) 2004-2014 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
To enable displaying the copyright statement:
Step
1. Enter system view.
2. Enable displaying the
copyright statement.

Configuring banners

Banners are messages that the system displays during user login.
The system supports the following banners:
• Legal banner—Appears after the copyright or license statement. To continue login, the user must
enter Y or press Enter. To quit the process, the user must enter N. Y and N are case-insensitive.
Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.
•
Login banner—Appears only when password or scheme authentication has been configured.
•
Incoming banner—Appears for Modem users.
•
Shell banner—Appears for non-Modem users.
•

Banner message input modes

You can configure a banner in one of the following ways:
Single-line input
•
Input the entire banner in the same line as the command. The start and end delimiters for the
banner must be the same but can be any visible character. The input text, including the command
Command
•
Set a non-recurring scheme:
clock summer-time zone-name
one-off start-time start-date
end-time end-date add-time
•
Set a recurring scheme:
clock summer-time zone-name
repeating start-time start-date
end-time end-date add-time
Command
system-view
copyright-info enable
87
Remarks
Optional.
Use either command.
By default, daylight saving time is
disabled, and the UTC time zone
applies.
*
Remarks
N/A
Optional.
Enabled by default.
*
*