HP ProCurve 7102dl Reference Manual page 104

SROS Command Line Interface Reference Guide
debug ip dhcp-server
Use the debug ip dhcp-server command to activate debug messages associated with Dynamic Host
Configuration Protocol (DHCP) server operation in the SROS. Debug messages are displayed (real-time)
to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the SROS are disabled.
Functional Notes
The debug ip dhcp-server command activates debug messages to provide information on DHCP server
activity in the SROS. The SROS DHCP server capability allows the SROS to dynamically assign IP
addresses to hosts on the network.
Usage Examples
The following example activates debug messages associated with DHCP server activity:
ProCurve>enable
ProCurve#debug ip dhcp-server
5991-2114 © Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
102