SROS Command Line Interface Reference Guide
ip firewall stealth
Use the ip firewall stealth command to disable TCP reset for denied firewall associations. The stealth
setting allows the route to be invisible as a route hop to associated devices.
Note
The SROS security features must be enabled (using the ip firewall command) for the
stateful inspection firewall to be activated.
Syntax Description
No subcommands.
Default Values
All SROS security features are disabled by default until the ip firewall command is issued at the Global
Configuration prompt. In addition, the stealth option is disabled until the ip firewall stealth command is
issued.
Usage Examples
The following example enables the stealth option:
ProCurve(config)#ip firewall stealth
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
411