HP ProCurve 7102dl Reference Manual page 436

SROS Command Line Interface Reference Guide
Syntax Description (Continued)
<port> *Optional
<seconds>
Default Values
<seconds>
Usage Examples
The following example creates customized policy timeouts for the following:
internet traffic (TCP Port 80) timeout 24 hours (86400 seconds)
telnet (TCP Port 23) timeout 20 minutes (1200 seconds)
FTP (21) timeout 5 minutes (300 seconds)
All other TCP services timeout 8 minutes (480 seconds)
ProCurve(config)#ip policy-timeout tcp www 86400
ProCurve(config)#ip policy-timeout tcp telnet 1200
ProCurve(config)#ip policy-timeout tcp ftp 300
ProCurve(config)#ip policy-timeout tcp all_ports 480
The following example creates customized policy timeouts for UDP netbios ports 137-139 of 200 seconds
and UDP ports 6000-7000 of 300 seconds:
ProCurve(config)#ip policy-timeout udp range netbios-ns netbios-ss 200
ProCurve(config)#ip policy-timeout udp 6000 7000 300
5991-2114
finger (Port 79)
ftp (Port 21)
ftp-data (Port 20)
gopher (Port 70)
hostname (Port 101)
ident (Port 113)
irc (Port 194)
klogin (Port 543)
kshell (Port 544)
Wait interval (in seconds) before an active session is closed (valid range: 0 to
4294967295 seconds).
The following default policy timeout intervals apply:
tcp (600 seconds; 10 minutes)
udp (60 seconds; 1 minute)
icmp (60 seconds; 1 minute)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Global Configuration Mode Command Set
tacacs (Port 49)
talk (Port 517)
telnet (Port 23)
time (Port 37)
uucp (Port 540)
whois (Port 43)
www (Port 80)
434