SROS Command Line Interface Reference Guide
Global Configuration Mode Command Set
ip multicast-routing
Use the ip multicast routing command to enable the multicast router process. The command does not
affect other multicast-related configuration. Use the no form of this command to disable. Disabling this
command prevents multicast forwarding but does not remove other multicast commands and processes.
Syntax Description
No subcommands.
Default Values
By default, this command is disabled.
Usage Examples
The following example enables multicast functionality:
ProCurve(config)#ip multicast-routing
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
424