HP ProCurve 7102dl Reference Manual page 56

SROS Command Line Interface Reference Guide
clear qos map
Use the clear qos map command to clear the statistics for all defined QoS maps or for maps meeting
user-configured specifications.
Variations of this command include the following:
clear qos map <map name>
clear qos map <map name> <sequence number>
clear qos map interface <interface id>
Syntax Description
<map name>
<sequence number>
<interface>
Default Values
No default value necessary for this command.
Usage Examples
The following example clears statistics for all defined QoS maps:
ProCurve#clear qos map
The following example clears statistics for all entries in the priority QoS map:
ProCurve#clear qos map priority
The following example clears statistics in entry 10 of the priority QoS map:
ProCurve#clear qos map priority 10
The following example clears QoS statistics for a specified interface:
ProCurve#clear qos map interface frame-relay 1
Note
The clear counters command clears ALL interface statistics (including QoS map interface
statistics).
5991-2114
Specifies the name of a defined QoS map.
Specifies one of the map's defined sequence numbers.
Specifies an interface for which to clear QoS map statistics (for just that interface).
Type clear cos map ? for a complete list of applicable interfaces.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
54