HP ProCurve 7102dl Reference Manual page 112

SROS Command Line Interface Reference Guide
debug ip igmp <group-address>
Use the debug ip igmp command to enable debug messages for IGMP transactions (including helper
activity). Debug messages are displayed (real-time) on the terminal (or Telnet) screen. Use the no form of
this command to disable the debug messages.
Note
Turning on a large amount of debug information can adversely affect the performance of
your unit.
Syntax Description
<group-address>
Default Values
No default value necessary for this command.
Usage Examples
The following example enables IGMP debug messages for the specified multicast group:
ProCurve>enable
ProCurve#debug ip igmp 10.1.1.1
5991-2114
Optional. IP address of a multicast group.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
Enable Mode Command Set
110